Swipe to the left

How To Cast Your Own Slingshot Ammo

How To Cast Your Own Slingshot Ammo
By Tom Metcalf-Jackson 6 months ago 1544 Views No comments

What size ammo should you use for slingshots?

With such a wide variety of sizes on offer, it’s hard to know which one to choose. Most slingshot shooters opt for balls between 8mm to 12mm, as this offers the greatest range with the most power. Lead balls are a popular choice, as they come in many different sizes, and are dense enough to offer a good level of power. They are also cheap and can be re-used.

Can you cast your own lead slingshot ammo?

Yes, casting your own is one of the best ways to keep your slingshot fed with ammo. It is simple to do, all you need is a lead melting pot, a mould and of course, some scrap lead. When casting your own balls, you can also use balls you have previously fired, making it an efficient and cheap way to keep shooting.

A Lee Production Pot, often referred to as a 'melting' pot.

What moulds do I need to cast my own lead balls for a slingshot?

Here’s a quick comparison chart of the most popular lead ball sizes for use in a slingshot. Remember, other sizes are available both smaller and larger, so if you can’t find the one for you, click here to view our full range. All our moulds are precision made by Lee Precision, and are a universal choice for casters. The higher the cavity of the mould the more balls you get per casting.

A Lee Double Cavity Ball Mould, SKU 90418

Chart showing moulds available:

Diameter

Imperial equivalent

Approx weight

Double Cavity Mould

6 Cavity Mould

12 Cavity Mould

8mm

.330

50 grains

Click Here to buy (.319 closest to 8mm)

Click Here to buy

9mm

.360

71 grains

Click Here to buy

Click Here to buy

10mm

.395

91 grains

Click Here to buy

11mm

.433

122 grains

Click Here to buy

12mm

.490

177 grains

Click Here to buy

Click Here to buy

Click Here to buy

Click here to view our full range of Lee Precision Round Ball Moulds

What equipment do I need to make slingshot ammo?

Producing your own ammo for your slingshot is very simple. All you need is a melting pot, a mould (as described above), and some lead. All that is required is to melt the lead in the melting pot, and cast straight into the mould, and you will have a perfectly round lead ball for your slingshot. It’s advisable to cast outdoors, or in a well ventilated space, but other than that, there’s not much to it.

How much does it cost to make my own slingshot ammo?

You can cast around 150 lead balls from a kilo of lead, much cheaper than buying pre cast or steel balls! A kilo of lead costs around £5, but you can also use roof flashing, lead pipe, wheel weights or any other scrap lead to bring your costs down. To view our full range of moulds, click here, and to view our melting pot, click here.

All products listed here are available to order on our website, and can be delivered straight to your door for only £4 shipping.

Henry Krank Newsletter Signup Banner